Cossor 7y4

ian barber

Admin
Registered
The 7Y4 is a late 1930's American full wave rectifier design made in the UK by Cossor.

7y4.jpg
7y4.jpg

Exposed on Ilford MG RC Paper as a paper negative
30 second exposure f/8 @ ISO 3
Developed by inspection in Ilford MG developer
 
Takes me back a good few years Ian. Not as far as 1930 I hasten to add. I started working life as an electronics engineer before abandoning it for the commercial world. But for a while I retained an interest in short wave radio and consequently a few government surplus bits and pieces passed through my hands. This and other octal base valves like the 6V6 etc were still in use. The paper negative treatment certainly speaks of the period of its manufacture.
 
I found these in an old box in the loft. I have been a Radio Ham for over 39 years now and back in the day, I used to build all my own equipment

I was only ever a shortwave listener lusting after something like an AR88. Eventually, like you I home built a double superhet receiver based on a pre built front end that you could buy in those days. What has that to do with photography? I eventually sold it in order to afford my first decent camera because the photography bug had by then bitten.
 
I was only ever a shortwave listener lusting after something like an AR88
I actually bought an AR88 from a rally in Leeds but my shack was in the loft and it was to big to fit through the door. I ended up setting up home in the shed :)
 
Back
Top